| Product Name |
HSA-740 (FASIVE-740) Single-Component Adhesive for Hot Stamping on Rough Paper and High-End Foils |
| Main Purpose |
FASIVE-740 is a single-component adhesive for hot stamping on rough paper surfaces and high-end holographic and hot stamping foils. |
| Product Features |
– Excellent adhesion to rough surfaces of pre-treated and untreated paper, as well as various composite paper surfaces.<br>- Excellent adhesion to OPP and cellulose acetate composite papers.<br>- Excellent hot stamping performance and good shear properties.<br>- Good coverage with no voids. |
| Physical Properties |
– Appearance: Yellow transparent liquid<br>- Solid Content (N.V %): 40±1%<br>- Formulation:<br> FASIVE-740: 50<br> Diluent: 50 (Composition: Methyl ethyl ketone (MEK): Toluene = 1:1)<br> Silica powder (F-100): 3 (15% of resin solids)<br>- Mixing Note: Mix the above ingredients using a high-speed disperser for more than 15 minutes to ensure uniform resin mixing.<br>- Coating and Dilution Temperature: 20~30℃<br>- Storage Conditions: Above 5℃ in winter, below 30℃ in summer |
| Coating Process |
– Anilox Roll: 140-160 mesh<br>- Dry Coating Weight: 1.6~2.0 g/m²<br>- Drying Oven Temperature: 110~120℃ for 10~15 seconds<br>- Humidification: Adding a small amount of water vapor to the coating surface can improve quality.<br>- Doctor Blade: 500 rpm, counter-rotation, in contact with the coating surface |
| Hot Stamping Conditions |
Approximately 95-105℃/0.4 seconds on vertical and flat-bed hot stamping machines. |
| Stability |
Sealed packaging, can be stored for at least 6 months in a cool and dry environment. |
| Packaging |
22 kg/barrel |
| Notes |
– The above data is for reference only and can be adjusted according to actual conditions on site.<br>- Shake the adhesive evenly before use. |
