| Product Name |
HSR-130 (FAREL-130) Water-Based Release Agent for Hot Stamping Foil |
| Main Purpose |
FAREL-130 is a water-based release agent suitable for hot stamping foil on various printed materials. |
| Product Features |
– Good release stability.<br>- Suitable for holographic and ordinary hot stamping foil products.<br>- Excellent detachment performance during release, suitable for high-speed hot stamping. |
| Physical Properties |
– Appearance: Emulsion<br>- Solid Content (N.V %): 20%<br>- Formulation:<br> FAREL-130: 0.8-1.2<br> Deionized water: 13.5<br> Ethanol (food grade): 13.5<br>- Release Force Control: Adjust the ratio of main agent to diluent between 0.8-1.2:27 based on user’s production process. Increasing the main agent will make the release looser, while decreasing it will make it tighter.<br>- Coating and Dilution Temperature: 45~50℃<br>- Storage Conditions: Above 5℃ in winter, below 30℃ in summer |
| Coating Process |
– Anilox Roll: 80L (Approximately 200 mesh)<br>- Drying Oven Temperature: 90℃-120℃-130℃-110℃ for 10~15 seconds<br>- Coating Speed: 100~150 m/min<br>- Doctor Blade: 500 rpm, counter-rotation, in contact with the coating surface |
| Stability |
Sealed packaging, can be stored for at least 6 months in a cool and dry environment. |
| Packaging |
180 kg/barrel, 22 kg/barrel |
| Notes |
– The above data is for reference only and can be adjusted according to actual conditions on site.<br>- Shake the release agent evenly before use. |
